English Español Français Русский

Wuxi Haoshuo Technology Co., Ltd.
Location: No. 57 Xinfeng Road, Meicun Industrial Area,Wuxi City, Jiangsu Province, China.
Zip code: 214000
Tel: +86-510-88554859
Fax: +86-510-88554853

Contact Person:
Rene Chen
Email: rene@coldrolltech.com
Mobile: +86-15961839091

Enlighten Xu
Email: enlighten@coldrolltech.com
Mobile: +86-15861672957

General Inquiry: info@coldrolltech.com
Home » Products » Cut to Length Line

6×2000mm Steel Cut to Length Line

Description
This steel cut to length line is used for leveling and cutting max.6mm×thickness 2000mm width steel coils into required length steel plates. The steel cut to length machine uses PLC system to control the whole line’s work, the operation is convenient and easy. It features high precision, topping stabilization and excellent performance.

Working Process
The sheet coil is loaded & elevated to appropriate position of the mandrel, and pushed into the decoiler by movement of feeding trolley automatically. The steel sheet is fed into 4-hi precision leveler through guiding device, like traction head, peeler & pinch roll. By adjusting the correct device to centering of the sheet, it goes through into precision leveling & length measuring machine, and then the cutting machine to cut the sheet into required length. The sheet is cut into required length controlled by PLC. The finished sheets are transported to stacker, and placed orderly.

Advantages
1. Compared with similar products, our steel cut to length line enjoys high speed and excellent precision.
2. With high quality and excellent efficiency, its speed can reach 70m/min and our strip precision can be up to 0.02mm.
3. We have professional installation and commissioning team, and they can solve all problems in operating process.
4. Our line has been up to the leading domestic level and company have quite rich experience in producing the cut to length line.
5. The cut to length line has reached relevant standards of ISO9001:14000, CE and SGS.
6. Suitable material: stainless steel, cold rolled steel coil.

Operation and Attention
1. Operator number should be 2 to 5 workers, and other people should keep away from this equipment
2. Around the steel cut to length machine, there should be yellow caution color to indicate off-limits place
3. Please do well lubrication for gears and chains.
4. Coil should be put right to keep the weight balanced. The coil car can reset only after fix and expand the coil into decoiler tightly.
5. First press the coil head by traction roll, then open the package of the coil, to prevent the coil head bounced off.
6. Operators shall not stand on the coil when machine running.
7. Do not move coil directly by hand.
8. Stop and check the machine units immediately when find fault. Only check out and correct, the machine can restart.
9. Do not remove or change circuit. In case of any problem, please consult professional technicians.

Packaging and Transportation
This steel cut to length line should adopt sea shipping by container. If there is no special requirement, this machine usually utilizes nude packaging, with cable wire and wooden block fastening it. All gadgets should be placed in accessory steel box.

Maintenance and Lubrication
1. Check machine units whether loosen or damaged and check electrical parts, hydraulic parts, and pneumatic parts whether abnormal after work finished. If so, should adjust or repair immediately.
2. Check the oil pipes are smooth, regular filling oil. (lubricating list)
3. Cut off main power, clean up machine units after work finished.
4. Regularly inspect machine to ensure proper operation.


Parameters of Steel Cut to Length Line
Raw material HR coil, CR coil, galvanized steel
Thickness 1 to 6mm
Width 2000 mm or as per need
Work speed 0-20M/min(adjustable)
Gauge length 600-4000mm
Cutting 5-15 pcs/min(L=2000mm)
Length accuracy ±1mm(L=2000mm)
Diagonal accuracy ±1.5mm(L=2000mm)
Leveling accuracy  ±1.0mm/m2
Total power 100kW
Weight about 50 tons
Installation dimension 20M × 8M × 3M (L × W × H)
Standard power source AC380V±10%/50Hz
Total weight about 70 tons
Operators for the machine 3-5 workers
 
Related Products
  • Cut to Length Line
    This leveling cut to length line is used for leveling and cutting to length of panels. We have series of cut to length lines, with ...
  • Radiator Production Line
    This radiator production line can be used in producing different specification radiators, with width among 535, 520, 480, 460...