English Español Français Русский

Wuxi Haoshuo Technology Co., Ltd.
Location: No. 57 Xinfeng Road, Meicun Industrial Area,Wuxi City, Jiangsu Province, China.
Zip code: 214000
Tel: +86-510-88554859
Fax: +86-510-88554853

Contact Person:
Rene Chen
Email: rene@coldrolltech.com
Mobile: +86-15961839091

Enlighten Xu
Email: enlighten@coldrolltech.com
Mobile: +86-15861672957

General Inquiry: info@coldrolltech.com
Home » Products » Slitting Machine

6×2000mm Steel Slitting Line

Description
This steel slitting line is applied for slitting max.6mm thickness×2000mm width steel coils into several small coils with required strip width. We also have the fast change double slitter system for optional, there are two slitters working in turn, one is working, another one is for changing blades.

Features
1.We have series of slitting lines, with thickness of 0.1-25mm and width up to 2500mm.
2. The main components are decoiler, coil open device, feeder, slitting machine, scrap winder, recoiler, and PLC control system, etc.
3. The steel slitting machine has got the relevant requirements of ISO9001:14000 and CE standards, etc.
4. Our slitting line has reached the leading domestic level and it is a famous brand in China.

Work Flow of Steel Slitting Line
Entry coil car→ un-coiler→ entry guides → pinch roll feeder & 5-roll flattener→ entry crop shear → centering device→ rotary slitter→ scrap winder→ loop table & buffer pit→ pre-separating and tension stand→ re-coiler→ exit coil car

Slitting machine

Operation and Attention
1. Operator number should be 2 to 5 workers, and other people should keep away from this equipment
2. Around the equipment, there should be yellow caution color to indicate off-limits place
3. Please do well lubrication for gears and chains.
4. Coil should be put right to keep the weight balanced. The coil car can reset only after fix and expand the coil into decoiler tightly.
5. First press the coil head by traction roll, then open the package of the coil, to prevent the coil head bounced off.
6. Operators shall not stand on the coil when machine running.
7. Do not move coil directly by hand.
8. Stop and check the machine units immediately when find fault. Only check out and correct, the machine can restart.
9. Do not remove or change circuit. In case of any problem, please consult professional technicians.

Packaging and Transportation
This steel slitting line should adopt sea shipping by container. If there is no special requirement, this machine usually utilizes nude packaging, with cable wire and wooden block fastening it. All gadgets should be placed in accessory steel box.

Maintenance and Lubrication
1. Check steel slitting machine units whether loosen or damaged and check electrical parts, hydraulic parts, and pneumatic parts whether abnormal after work finished. If so, should adjust or repair immediately.
2. Check the oil pipes are smooth, regular filling oil. (lubricating list)
3. Cut off main power, clean up machine units after work finished.
4. Regularly inspect machine to ensure proper operation.


Parameters of Steel Slitting Line
Raw material hot rolled steel, cold rolled steel, galvanized sheet, etc.
Thickness 1 to 6mm or as per request  
Width max.1600/1800/2000mm
Max coil weight 25 to 35 ton
Slitting strip min.40mm
Slitting strips design as per need
Slitting tolerance ±0.1mm
Power source AC380V±10%/50Hz, or as per Buyer’s requirement
Main power about 350kW
Machine outline(L×W) about 35M×8M
Total weight about 75 tons
Related Products
  • Slitting Machine
    This slitting line is used for slitting raw material coils into strips. This machine can slit raw material coils into specific width. Our ...
  • Cut to Length Line
    This leveling cut to length line is used for leveling and cutting to length of panels. We have series of cut to length lines, with ...